LavorPro UK Site > Products > Ride-on floor scrubber driers
1
Yes
None
1
1000000
Name...
/products/ride-on-floor-scrubber-driers/
Thumbnail
Sort By:

Categories:

Ride-on floor scrubber driers
Comfort XXS

Equipped with:

  • Double counter rotating brush (66 cm of scrubbing width) obtaining better stability and constant pressure.
  • Great working autonomy (till 4.5 hours) thanks to the possibility to use 4 batteries 6 V 240 Ah and to rear wheel-drive.
  • Large load capacity tank (real load of 75 l.), resulting in reduced numbers of stops and maximum use of battery for effective operation of the machine.
  • Ergonomic steering wheel of new design with user friendly controls and digital display.
  • Easy access to electrical components.
  • Inspection cover for fast and easy cleaning and sanification of dirt water tank.
  • Automatic device that stops brushes and detergent water outflow when the machine is stationary.
  • Self-levelling brush plate. Automatic detergent measuring system.
  • Great working autonomy thanks to the possibility to use 4 batteries 6 V 180 Ah granting continuous working up to 4.5 hours.
  • Possibility to use also 2 batteries 12V.
  • Less battery consumption thanks to rear wheel-drive.
  • Large load tanks made of shock and acid proof polyethylene (real load of 85 l.), avoiding frequent stops for refilling.
  • User friendly control panel.
  • Steering wheel with digital controls and display.
  • Squeegee and brush plate mechanical and user friendly lifting lever: min. maintenance cost training time for the users.
  • Scrubbing unit with double brush with brush plate made of steel for a great pressure (32 kg.) on the floor resulting in an easy and deep cleaning of any kind of dirt.
  • Rear wheel-drive on 2 wheels allows the machine to get over remarkable slopes.
  • Detergent solution is cleansed by an external completely accessible filter, that holds any impurities, thus protecting the solenoid valve.
  • The easy access to all internal components of machines make it possible to reduce maintenance cost.
  • The comfortable and ergonomic seat allows the operator to work effortless for a long time, improving productivity.
  • Its very compact size make it perfect to work in small areas where walk behind models are usually used.
  • The use of machine makes working easier and quicker with a huge saving of time.

Technical characteristics

Working width 660 mm
Squegee width 855 mm
Max working capacity 3250 m2/h
Detergent tank capacity 80 l
Recovery tank capacity stop/total 80-85 l
Traction rear wheel-drive
RPM / Brush pressure 170/32
Brush motor power 2x400 W
Depression / vacuum motor power 1700 mmH2O/400W mmH2O/W
Traction motor power 400 W
Power supply 24V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Integrated battery charger:
Some models are equipped with integrated battery charger, other ones have the predisposition only. It is possible to charge batteries in different rooms, without coming back to the same place.

#

Integrated battery:
Standard integrated battery is built with a maintenance free technology and it does not require restrictions about the place for battery charging. The non stop research allow to use always up-to-date batteries that combined with appropriate battery charger grant machine top performances.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Comfort XS-R

Equipped with:

Capable to work for the maintenance and deep cleaning of large areas (up to 3,700 m²) with a very important reduction of cost of cleaning. More than 50 kg of constant pressure on the brushes.

  • Large load capacity tank, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine.
  • Compact size (810 mm).
  • Stability even when fully loaded, front independent wheeldrive with tight steering radius.
  • Recovery tank control window for easy cleaning and ordinary maintenance.
  • Easy access to electrical components.
  • Automatic device that stops brushes and detergent water outflow when the machine is stationary.
  • Self-levelling brushes
  • The detergent water tank serves as battery compartment, allowing the housing of great capacity batteries granting continuous working time up to 4-5 hours.
  • Large capacity shock and acid proof polyethylene tank (110 l) improves productivity and frequent refilling avoiding idle time. Simple and intuitive controls reduce operator's training time.
  • Easy mechanical brush plate and squeegee lifting system, for low maintenance costs.
  • The enbloc brush plate apply a very high pressure (50 kg) to the floor, strongly and deeply removing any kind of dirt.
  • The cleaning solution is purified by an easily accessible external filter which holds back any possible debris, thus protecting the solenoid valve operation.
  • The ergonomic and comfortable shape of the machine allows the operator to work effortless for a long time, improving productivity.

Technical characteristics

Scrubbing / squeegee width 750/900 mm
Detergent tank capacity 110 l
RPM / pressure on the brushes 170/50 RPM/Kg
Brush motor power 2 x 400 W
Traction front motorwheel
Depression / Vacuum motor 1300/400 mmH2O/W
Max. working capacity 3750 m2/h
Recovery tank capacity stop/total 130-155 l
Traction motor power 600 W
Power supply 24V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Comfort XS-R Up

Equipped with:

Capable to work for the maintenance and deep cleaning of large areas (up to 4,000 m²) with a considerable reduction of cleaning costs. More than 50 kg of constant pressure on the brushes.

  • Large load capacity tank, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine.
  • Compact size (810 mm).
  • Stability even when fully loaded, front independent wheeldrive with tight steering radius.
  • Recovery tank control window for easy cleaning and ordinary maintenance.
  • Automatic brush plate lifting system.
  • Automatic squeegee squeegee lifting while reverse going.
  • Automatic device that stops brushes and detergent water outflow when the machine is stationary.
  • Antifoam device.
  • Self-levelling brushes.
  • Integrated on-board battery charger.
  • The easy access to the recovery tank allows fast cleaning and sanification of the tank; the tilting tank together with a large size drain hose allow the complete emptying of the tank and the removal of any type of solid dirt.
  • The antifoam device protects suction motor, as well as the electronic switch floating that stops suction when the tank is full.
  • The machine is equipped with actuators for the automatic lifting of the plate brush and squeegee.
  • Control panel is provided with hour meter, speed adjustment knob detergent solution and low level warning light. All motors are protected by thermal breakers.
  • The detergent water tank serves as battery compartment, allowing the housing of great capacity batteries.
  • Battery charger and suction motor are placed the recovery tank; the housing of the vacuum motor allows to drastically reduce the operating noise.
  • The ergonomic and comfortable shape of the machine allows the operator to work effortless for a long time, improving productivity.
  • Thanks to the compact dimensions the machine can work with agility even in narrow spaces.

Technical characteristics

Scrubbing / squeegee width 750/900 mm
Detergent tank capacity 110 l
RPM / pressure on the brushes 170/50 RPM/Kg
Brush motor power 400 W
Max. working capacity 3750 m2/h
Recovery tank capacity stop/total 130/155 l
Depression / vacuum motor power 1300/400 mmH2O/W
Traction motor power 600 W
Power supply 24V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Integrated battery charger:
Some models are equipped with integrated battery charger, other ones have the predisposition only. It is possible to charge batteries in different rooms, without coming back to the same place.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Comfort S-R

Equipped with:

Suitable for maintenance and deep cleaning of medium and large areas (up to 4,500 m²) with a considerable reduction of cleaning costs. Comfort S-R has been designed to resist even to extreme stresses. the frame is made of steel with a thickness profiles varying from 5 to 12 mm, protected with a high resistance corrosion-proof paint.

  • Large load capacity tank, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine.
  • Compact size.
  • Stability even when fully loaded.
  • Independent Front wheel-drive with tight steering radius.
  • Easy access to electrical components.
  • Automatic brush plate lifting system.
  • Automatic squeegee lifting system.
  • Automatic squeegee lifting while reverse going.
  • Automatic device that stops brushes and detergent water outflow when the machine is stationary.
  • Antifoam device.
  • Self-levelling brushes.
  • High-performance batteries resulting in high working efficiency
  • Quick lock recovery tank cap allows for fast and esy cleaning and sanification of the tank; the tilting tank together with a large size drain hose allow the complete emptying of the tank and the removal of any type of solid dirt.
  • The antifoam device protects suction motor, as well as the electronic switch floating that stops suction when the tank is full.
  • Comfortable steering wheel.
  • User friendly control panel, provided with hour meter, speed adjustment knob detergent solution and low level warning light.
  • All motors are protected by thermal breakers.
  • 80 kg of continuous brush plate pressure with Self Leveling System to strongly and deeply removing any kind of dirt on any kind of floor.
  • Strong oil-proof polyurethane wheels.
  • 500 Ah C5 battery box allowing continuous working time up to 5 hours.
  • Built with strong components

Technical characteristics

Scrubbing / squeegee width 900/1000 mm
Detergent tank capacity 140 l
RPM / pressure on the brushes 150/50 RPM/Kg
Brush motor power 1250 W
Traction front motorwheel
Depression / Vacuum motor 1734/550 mmH2O/W
Max. working capacity 6200 m2/h
Recovery tank capacity stop/total 150-180 l
Traction motor power 1000 W
Power supply 24V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Comfort M

Equipped with:

Suitable for maintenance and deep cleaning of medium and large areas (up to 6,000 m²). More than 120 kg of constant pressure on the brushes. Thanks to the optimal weight distribution and to the use of strong oil-proof polyurethane wheels the drive is perfect in all working conditions. COMFORT M is easy to use thanks to the simple and user friendly controls.

  • Suitable for maintenance and deep cleaning of medium and large areas (up to 6,000 m²).
  • More than 120 kg of constant pressure on the brushes.
  • Large load capacity tank, resulting in reduced number of stops and maximum use of battery charge for effective operation of the machine.
  • Stability even when fully loaded.
  • Independent Front wheel-drive with tight steering radius.
  • Easy access to electrical components.
  • Automatic brush plate lifting system.
  • Automatic lifting system.
  • Automatic squeegee squeegee lifting while reverse going.
  • Automatic control system for brush rotation and detergent water outflow.
  • Antifoam device.
  • Self-levelling brush plate.
  • Hour meter.
  • High-performance batteries resulting in high working efficiency.
  • The unique anti foam device dramatically reduces the foam generation and prevents it from touching the suction motor, thus protecting its operation.
  • The electronic switch floating stops suction when the tank is full.
  • Large tank opening for fast and easy cleaning and sanification.
  • The strong V-shaped squeegee made of steel floor profile is widely adjustable and allows to combine the operation of the rubber blades with the high suction power, to get a perfect drying result on every surface.
  • The special box filter retains solid debris and prevents the obstruction of the suction hose.
  • The scrubbers are easy to use thanks to the simple and user friendly controls.
  • From the control panel the operator can adjust the maximum forward speed and the quantity of cleaning solution outflow, selecting the options most suitable to the dirt type.
  • Job is simplified and made faster by the automatic lifting of the squeegee and of the brush plate.
  • The emptying of the water tank is quick solution with a simple and easy accessible mechanical tap.

Technical characteristics

Scrubbing / squeegee width 1020/1250 mm
Detergent tank capacity 200 l
RPM / pressure on the brushes 150/120 RPM/Kg
Brush motor power 1500 W
Traction front motorwheel
Depression / Vacuum motor 1800/600 mmH2O/W
Max. working capacity 7140 m2/h
Recovery tank capacity stop/total 210/240 l
Traction motor power 900 W
Power supply 36V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Comfort L

Equipped with:

Suitable for maintenance and deep cleaning of medium and large areas (up to 7,000 m²). More than 170 kg of constant pressure on the brushes.

  • Solution tank capacity 300 liters allows exceptional autonomy and productivity.
  • Stability even when fully loaded.
  • Innovative traction system with three independent motor wheels controlled by electronic cards.
  • Easy access to electrical components
  • Automatic brush plate lifting system.
  • Automatic lifting system.
  • Automatic squeegee squeegee lifting while reverse going.
  • Automatic control system for brush rotation and detergent water outflow.
  • Antifoam device.
  • Self-levelling brushes, hour meter, solenoid valve.
  • High-performance batteries resulting in high-working-scrubber driers efficiency.
  • Designed to perform the hardest work and to resist even to extreme stresses with maximum comfort; the frame is made of steel with a thickness profiles varying from 5 to 12 mm, protected with a high resistance corrosion-proof paint.
  • The unique anti foam device dramatically reduces the foam generation and prevents it from touching the suction motor, thus protecting its operation.
  • The electronic switch floating stops suction when the tank is full.
  • Large tank opening for fast and easy cleaning and sanification.
  • The cleaning solution tank with an exceptional capacity of 300 liters and the high autonomy of the battery ensure to productivity at the top of the range.
  • The wide rear opening allows for an easy and quick refilling of the cleaning solution tank
  • The motorwheels, designed and built by Lavor, grant optimal performance and exceptional reliability (over 30,000 hours).
  • The innovative three-wheel drive system ensures perfect traction in every operating condition.
  • The high power of the three motorwheels allows the machine to get over remarkable slopes.

Technical characteristics

Scrubbing / squeegee width 1220/1450 mm
Detergent tank capacity 280 l
RPM / pressure on the brushes 150/170 RPM/Kg
Brush motor power 3 x 1000 W
Traction 3-wheels drive
Depression / Vacuum motor 1800/600 mmH2O/W
Max. working capacity 8540 m2/h
Recovery tank capacity stop/total 315/340 l
Traction motor power 3 x 600 W
Power supply 36V

#

Number of disc brushes:
The scrubbing group meets different cleaning path need with 1, 2 or 3 disc brushes.

#

Solenoid valve:
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.

#

Hour meter:
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.

#

Charge meter and battery protection:
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the batteries, preventing the complete discharge with any kind of technologies.

#

U-turns in closed area:
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.

Applications pads:

#

BEIGE PAD - POLISHING:
Polyester To polish all kinds of floor. Use dry.

#

GREEN PAD - INTERMEDIATE CLEANING ACTION:
Nylon To remove all the old superficial wax, rests, obtaining ready floors to be recoated. Use wet.

#

BLACK PAD - WET STRIPPING:
Nylon For wet stripping of heavy layers of wax. Ideal to remove old floor finish scu and cement marks.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Ride-on floor scrubber driers
Comfort XXS
Equipped with: Double counter rotating brush (66 cm of scrubbing width) obtaining better stability and constant pressure. Great working autonomy (till 4.5 hours) thanks to t... Read More
Comfort XS-R
Equipped with:Capable to work for the maintenance and deep cleaning of large areas (up to 3,700 m²) with a very important reduction of cost of cleaning. More than 50 kg of constant pressure ... Read More
Comfort XS-R Up
Equipped with:Capable to work for the maintenance and deep cleaning of large areas (up to 4,000 m²) with a considerable reduction of cleaning costs. More than 50 kg of constant pressure on t... Read More
Comfort S-R
Equipped with:Suitable for maintenance and deep cleaning of medium and large areas (up to 4,500 m²) with a considerable reduction of cleaning costs. Comfort S-R has been designed to resist e... Read More
Comfort M
Equipped with:Suitable for maintenance and deep cleaning of medium and large areas (up to 6,000 m²). More than 120 kg of constant pressure on the brushes. Thanks to the optimal weight distr... Read More
Comfort L
Equipped with:Suitable for maintenance and deep cleaning of medium and large areas (up to 7,000 m²). More than 170 kg of constant pressure on the brushes. Solution tank capaci... Read More

If You Need Any Commercial or Industrial Cleaning Solution... We Are Available For You

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close