LavorPro UK Site > Products > Hot water high pressure cleaners

Hyper LR

Hyper LR Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling.
  • Three ceramic pistons, three ceramic coated pistons (mod. 1614 LP)
  • Built-in by-pass valve nickel plating brass linear pump head with high temperature water seals and bushing.
  • Integrated elastic joint, for best pump coupling (1614 Excluded).
  • Low voltage and delayed Total Stop.
  • Suction and delivery S. S. valves.
  • Vertical burner with high thermal efficiency steel coil.
  • Temperature regulation gauge with high sensitive stainless steel sensor.
  • Detergent built-in tank 3 l.
  • Auxiliary motor for burner air cooling and mechanical two ways fuel pump.
  • Hose reel (optional).

Technical characteristics

Operating pressure / max 160 bar-2321 psi
Delivery rate 840 l/h-3.70 GPM
Engine Type/HP 4200W - 400V~50Hz 3ph
Motorpump type/RPM MP4 Ni/1450 RPM
Max. water inlet temperature 40/140 °C
Dimension/weight 94x65x90cm / 109 Kg - 240 lbs

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Low voltage and delayed Total Stop:
To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Hyper LR

Hyper LR Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling.
  • Three ceramic pistons, three ceramic coated pistons (mod. 1614 LP)
  • Built-in by-pass valve nickel plating brass linear pump head with high temperature water seals and bushing.
  • Integrated elastic joint, for best pump coupling (1614 Excluded).
  • Low voltage and delayed Total Stop.
  • Suction and delivery S. S. valves.
  • Vertical burner with high thermal efficiency steel coil.
  • Temperature regulation gauge with high sensitive stainless steel sensor.
  • Detergent built-in tank 3 l.
  • Auxiliary motor for burner air cooling and mechanical two ways fuel pump.
  • Hose reel (optional).

Technical characteristics

Operating pressure / max 160 bar-2321 psi
Delivery rate 840 l/h-3.70 GPM
Engine Type/HP 4200W - 400V~50Hz 3ph
Motorpump type/RPM MP4 Ni/1450 RPM
Max. water inlet temperature 40/140 °C
Dimension/weight 94x65x90cm / 109 Kg - 240 lbs

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Low voltage and delayed Total Stop:
To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

If You Need Any Commercial or Industrial Cleaning Solution... We Are Available For You

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close