LavorPro UK Site > Products > Hot water high pressure cleaners

Tekna LP

Tekna LP Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling.
  • Three ceramic pistons, brass linear pump head with built-in by-pass valve.
  • Low voltage and delayed Total Stop.
  • Suction and delivery valves s/s.
  • Vertical burner with high thermal efficiency steel coil.
  • Auxiliary motor for air-cooling burner and two ways fuel pump.
  • Regulation Temperature gauge with high sensitive stainless steel sensor.
  • Low fuel light lamp bulb and cut off. Safety valve.
  • Header tank and antiscale device.
  • Panel with analogic controls.
  • Hose-reel (cod. 6.608.0010).

Technical characteristics

Operating pressure / max 150 bar
Delivery rate 900 l/h
Absorbed power / Voltage 5500 W/400 V-50 Hz 1 ph
Motorpump type MPW5/1450 RPM

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.

#

Low voltage and delayed Total Stop with intelligent shutdown:
To avoid quick and multiple start and shutdown of the motor/pump group whenever the guntrigger is pulled and released, this disposal delaysof about 15 seconds the machine shut down. Incase the machine is unused for more than 20minutes or there are leakages in the pressurecircuit, the machine shuts down automaticallyand completely: control panel power cut-off.Prevention, energy saving, top safety and pumplonger life.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Tekna LP

Tekna LP Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling.
  • Three ceramic pistons, brass linear pump head with built-in by-pass valve.
  • Low voltage and delayed Total Stop.
  • Suction and delivery valves s/s.
  • Vertical burner with high thermal efficiency steel coil.
  • Auxiliary motor for air-cooling burner and two ways fuel pump.
  • Regulation Temperature gauge with high sensitive stainless steel sensor.
  • Low fuel light lamp bulb and cut off. Safety valve.
  • Header tank and antiscale device.
  • Panel with analogic controls.
  • Hose-reel (cod. 6.608.0010).

Technical characteristics

Operating pressure / max 150 bar
Delivery rate 900 l/h
Absorbed power / Voltage 5500 W/400 V-50 Hz 1 ph
Motorpump type MPW5/1450 RPM

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.

#

Low voltage and delayed Total Stop with intelligent shutdown:
To avoid quick and multiple start and shutdown of the motor/pump group whenever the guntrigger is pulled and released, this disposal delaysof about 15 seconds the machine shut down. Incase the machine is unused for more than 20minutes or there are leakages in the pressurecircuit, the machine shuts down automaticallyand completely: control panel power cut-off.Prevention, energy saving, top safety and pumplonger life.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

If You Need Any Commercial or Industrial Cleaning Solution... We Are Available For You

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close