LavorPro UK Site > Products > Cold Water High Pressure Cleaners

Hyper NR

Hyper NR Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling (mod. 1713 LP 2017 LP)
  • Three ceramic coated pistons (Hyper NR 1509/NR 2017).
  • Three full ceramic pistons (Hyper NR 1713).
  • Built-in by-pass valve nickel plating brass linear pump head with high temperature
    water seals and bushing.
  • Suction and delivery S. S. valves.
  • Low voltage and delayed Total Stop (mod. 1713 LP 2017 LP)
  • Detergent built-in tank for indirect suction (2,8 lt.).
  • Pressure regulator.
  • Glicerine pressure gauge.
  • Hose-reel.

Technical characteristics

Operating pressure / max 150/160 bar-2175/2320 psi
Delivery rate 540 l/h - 2.4 GPM
Abs. power/voltage 3000W - 230V~50Hz 1 ph
Motorpump type/RPM MP4 Ni/1450 RPM
Max inlet water temperature 40 °C
Dimension/weight 76x41x75cm / 33 kg - 72,6 lbs

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Total Stop:
Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection.

#

Low voltage and delayed Total Stop:
To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

Hyper NR

Hyper NR Image

Equipped with:

  • 4 poles electrical motor (1450 RPM) with thermal protection and water cooling (mod. 1713 LP 2017 LP)
  • Three ceramic coated pistons (Hyper NR 1509/NR 2017).
  • Three full ceramic pistons (Hyper NR 1713).
  • Built-in by-pass valve nickel plating brass linear pump head with high temperature
    water seals and bushing.
  • Suction and delivery S. S. valves.
  • Low voltage and delayed Total Stop (mod. 1713 LP 2017 LP)
  • Detergent built-in tank for indirect suction (2,8 lt.).
  • Pressure regulator.
  • Glicerine pressure gauge.
  • Hose-reel.

Technical characteristics

Operating pressure / max 150/160 bar-2175/2320 psi
Delivery rate 540 l/h - 2.4 GPM
Abs. power/voltage 3000W - 230V~50Hz 1 ph
Motorpump type/RPM MP4 Ni/1450 RPM
Max inlet water temperature 40 °C
Dimension/weight 76x41x75cm / 33 kg - 72,6 lbs

#

Linear Pump:
The movement of the (3) pistons occurs through a system of connecting rods and crankshaft. The longitudinal axle of the pistons (placed at the same level or linear) is perpendicular to the motor rotation axle. It is more versatile to bear high delivery rates (from 21 l/ min) and it has a better self priming.

#

Water cooled motor:
Water flows through the S. S. coil around the motor, this allows a better thermal exchange (and so a cooling) than air also in those countries where inlet water could reaches 60°C. This allows a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.

#

Total Stop:
Releasing the gun trigger the pump stops automatically avoiding element damages during the by-pass phase. Pulling the trigger, the high-pressure cleaner starts automatically. Max pump protection.

#

Low voltage and delayed Total Stop:
To avoid quick and multiple start and shut down of the motor/pump group whenever the gun trigger is pulled and released, this disposal delays of about 15 seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.

#

Motor low rotation speed:
The electric motor transfers the same number of revolutions to the pump. With a 4 poles motor there is a lower rotation speed of the components (1400 RPM in case of 50Hz or 1750 RPM in case of 60 Hz) granting longer pump life. Extending lifetime solution.


#

Flip through our UK catalogue
Download

#

Find your nearest LavorPro dealer:
Click here

#

Contact us about this product
Click here


#

Watch the video on our YouTube channel LavorPro YT Channel

If You Need Any Commercial or Industrial Cleaning Solution... We Are Available For You

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close